• Apply engine oil onto the piston pin.

• Make sure that the "Y" mark @ on the connecting rod faces left when the arrow mark ® on the piston is pointing up. Refer to the illustration.

• Reinstall each piston into its original cylinder (numbering order starting from the left: #1 to #4).

3. Lubricate:

(with the recommended lubricant)

Recommended lubricant Engine oil

Recommended lubricant Engine oil

4. Offset:

• piston ring end gaps

© Top ring © Lower oil ring rail © Upper oil ring rail © 2nd ring © Oil ring expander

5. Lubricate:

• crankshaft pins

• big end bearings

• connecting rod big end inner surface (with the recommended lubricant)

Was this article helpful?

0 0

Post a comment