at 200C (68 °F) Insulation resistance (2) Above 1 MQ at 20°C (68°F)

b. If any resistance is out of specification, replace the starter motor.

5. Measure: • brush length Out of specification as a set.

Replace the brushes

Brush length wear limit 3.5 mm (0.14 in)

6. Measure: • brush spring force Out of specification springs as a set.

Replace the brush

Brush spring force 7.16 - 9.52 N (730 - 971 gf, 25.77

• gear teeth Damage/wear

Replace the gear.

Replace the defective


Was this article helpful?

0 0

Post a comment