Troubleshooting Details

This section describes the countermeasures per fault code number displayed on the meter. Check and service the items or components that are the probable cause of the malfunction following the order. After the check and service of the malfunctioned part has been completed, reset the meter display according to the "Reinstatement method". Fault code No.:

Fault code number displayed on the meter when the engine failed to work normally. (Refer to the "Fault code table".) Diagnostic code No.:

Diagnostic code number to be used when the diagnostic mode is operated. (Refer to "DIAGNOSTIC MODE".)

easgg9g8

Fault code No. 12 Symptom No normal signals are received from the crankshaft position sensor.

Used diagnostic code No. - -

Order

Inspection operation item and probable cause

Operation item and countermeasure

Reinstatement method

Was this article helpful?

0 0

Post a comment