Nm 14 mkg 10 fWb

d. Check the steering head for looseness or binding by turning the front fork all the way in both directions. If any binding is felt, remove the under bracket and check the upper and lower bearings.

Refer to "STEERING HEAD" in chapter 4.

e. Install the rubber washer (3.

f. Install the upper ring nut (2.

g. Finger tighten the upper ring nut (2, then align the slots of both ring nuts. If necessary, hold the lower ring nut and tighten the upper ring nut until their slots are aligned.

h. Install the lock washer ®.

Was this article helpful?

0 0

Post a comment