0 12- 0 17 mm (0.005 ~

0 007 in)

7 Loosen the valve adjuster lock nut Turn the adjuster in or out to obtain the correct clearance. Hold the adjuster to prevent it from moving and thoroughly tighten the lock nut

Recheck the clearance after tightening.

Valve clearance check and adjustment should be done when the engine is cold.

1 fm+t+t gangĀ«

8 Install the intake and exhaust tappet covers and left crankcase cover

9 Intall the fuel tank and seat 10 Connect the fuel pipe

Was this article helpful?

0 0

Post a comment