Periodic Maintenance And Minor Repair

3. Remove the air filter.

4. Tap the air filter lightly to remove most of the dust and dirt and blow out the remaining dirt with compressed air as shown. If the air filter is damaged, replace it.

5. Reassemble by reversing the removal procedure.

1. Hose

2. Hole

1. Hose

2. Hole

Be sure to connect the hose from the carburetor to the lower hole in the air filter case.


• Make sure the air filter is properly seated in the air filter case.

• The engine should never be run without the air filter installed. Excessive piston and/or cylinder wear may result.


Was this article helpful?

0 0

Post a comment