Awarning

Do not attempt to straighten a bent pivot shaft.

3. Clean: •Pivot shaft •Collar •Spacers • Bearings •Thrust cover

Recommended cleaning solvent: Kerosine

Damage/wear ->■ Replace. •Bearings •Collar Damage/pitting Replace.

CHECKING THE DRIVE CHAIN

1. Measure:

•Ten-link section ® of the drive chain Out of specification ->• Replace the drive chain.

Max. ten-link drive chain section: 152.5 mm (6 in)

•While measuring the ten - link section, push down on the drive chain to increase its tension.

•Measure the length between drive chain roller © and © as shown.

• Perform this measurement at two or three different places.

Was this article helpful?

0 0

Post a comment