Carb

Pilot screw: 2 turns out

INSTALLATION

Reverse the "REMOVAL" procedures. Note the following points. 1. Install:

•Piston valve (2) (with jet needle) •Top cover (with throttle valve)

2. Install:

(throttle valve and plunger) •Rink cover (T)

Screws (rink cover):

Nuts (intake manifold): 10 Nm (1.0 m.kg, 7.2 ft.lb)

4. Check: •Cables routing •Hoses routing

Incorrect-» Correct.

Refer to the "CABLE ROUTING" section in the CHAPTER 2.

•Throttle cable operation Unsmooth operation -»Repair.

Was this article helpful?

0 0

Post a comment