Carb

6. Inspect:

•Coasting enricher rubber diaphragm © •Spring (2) •Cover (3) Damage/Tears (diaphragm) -> Replace.

d^r x ö ^

7. Inspect: •Main jet © •Main nozzle (2) •Pilot jet (3) Contamination-»Blow out. •Pilot screw © •Spring (5) •O-ring (6) Damage-» Replace.

8. Inspect: •Piston valve

Wear/Damage-» Replace.

•Free movement Stick-» Replace.

Insert the throttle valve into the carburetor body, and check for free movement.

ASSEMBLY

Reverse the "DISASSEMBLY" procedures. Note the following points.

CAUTION: _

Before reassembling, wash the all parts with clean gasoline.

V

Pilot jet:

1 Nm (0.1 m.kg, 0.7 ft.lb)

Main jet:

1 Nm (0.1 m.kg, 0.7 ft-lb)

Screws (float chamber):

2 Nm (0.2 m.kg, 1.4 ft-lb)

Screws (needle valve holder):

1 Nm (0.1 m.kg, 0.7 ft.lb)

Was this article helpful?

0 0

Post a comment