Excessive chain slack will overload the engine and other vital parts;keep the slack within the specified limits.

• If the chain slack cannot be adjusted, replace the sprockets and drive chain as a set.

• Tighten the rear wheel hub bolt and lock-nut.


Rear wheel hub lower bolt:

50 Nm (5.0 m * kg , 36 ft

• lb)

Rear wheel hub upper bolt:

100 Nm (10 m- kg, 72 ft

• lb)

Locknuts(Chain puller)

16 Nm (1.6 m- kg, 11 ft ♦


Was this article helpful?

0 0

Post a comment