Caution

Always tighten the locknut against the spring adjuster and torque the locknut to specification.

BRAKE AND CHANGE PEDAL/BRAKE AND CLUTCH LEVERS LUBRICATION/CABLE INSPECTION AND LUBRICATION

\NSP

ADJ

Turn the adjuster (D to increase (3) or decrease ® the damping.

STD SETTING: 15 clicks out MINIMUM SETTING: 20 clicks out MAXIMUM SETTING: 0 clicks out

© Match marks

CAUTION; -

Never attempt to turn the adjuster beyond the maximum or minimum setting.

WB000011

BRAKE AND CHANGE PEDAL/BRAKE AND CLUTCH LEVERS LUBRICATION

Lubricate pivoting peats of each lever and pedal.

SAE 10W30 Motor oil

WB000012

CABLE INSPECTION AND LUBRICATION

Cable inspection and lubrication steps:

• Remove the two grip end that secure throttle to handlebar.

• Hold cable end high and apply several drops of lubricant to cable.

• Coat metal surface to disassembled throttle twist grip with suitable all-purpose grease to minimize friction.

• Check for damage to cable insulation. Replace any corroded or obstructed cables.

• Lubricate any cables that do not operate smoothly.

^ SAE 10W30 Motor oil

*»*»»»»***«*»»***»»*****»#»♦*»»»»»»»*

INSP

ADJ

Erm

WB000013

Was this article helpful?

0 0

Post a comment