Caution

Don't forget to turn off the main switch when checking or replacing the fuse. Otherwise, it may cause accidental short-circuiting.

INSP

0P3

ADJ

mim

The fuse box is located under the left side rear fender. 1. Inspect: • Fuses

Description

Amperage

Quantity

CD Main

15A

1

(D Reserve

15A

• Connect the pocket tester to the fuse and check it for continuity.

Set the tester selector to "QX1" position.

Pocket tester: P/N YU-03112

• If the tester indicates infinity, replace the fuse.

*»»»»*»»»»»»*»***»»*»*»»»**»»»*»»*»»»

2. Replace:

Replacement steps:

• Install a new fuse of proper amperage.

• Turn on the switches to verify operation of electrical device.

• If the fuse blows immediately again, check electrical circuit.

A WARN IN G

Never use a fuse with a rating other then specified, or other, material in place of a fuse. An improper fuse may cause damage to the electrical system and possible cause a fire, or the lighting and/or ignition may cease to function.

INSP

ADJ

HEADLIGHT BEAM ADJUSTMENT

1. Adjust

• Headlight beam (vertical) Turn the adjuster (J) in or out.

WB203003

HEADLIGHT BULB REPLACEMENT

1. Remove:

• Headlight unit assembly

Turning in

Headlight beam moves to upper.

Turning out

Headlight beam moves to lower.

WB203003

HEADLIGHT BULB REPLACEMENT

1. Remove:

• Headlight unit assembly

2. Remove:

Turn the bulb holder counterclockwise to release bulb.

• Headlight bulb

3. Install:

AWARNING

Keep flammable products and your hands away from the bulb while it is on, it will be hot. Do not touch the bulb until it cools down.

INSP

ADJ

Erl1

CAUTION: Avoid touching glass part of bulb. Also keep it free from oil otherwise, transparency of glass, bulb life and illuminous flux will be adversely affected. If oil gets on bulb, clean it with a cloth moistened thoroughly with alcohol or lacquer thinner.

Was this article helpful?

0 0

Post a comment