Chas

Replace pads as a set if either is found to be worn to the wear limit.

3. Install:

•Pads (new) © •Shim (2) •Retaining bolt ( NOTE: _

Be sure to install the shim (2) at piston side.

»Steering knuckle

Axle nut:

5. Install:

Install the disc cover (outer) © with punched burrs (2) on the hub side.

CALIPER Caliper removal

1. Remove: •Front wheel •Disc cover (outer) •Steering knucke

Was this article helpful?

0 0

Post a comment