Chas

INSTALLING THE REAR SHOCK ABSORBER

1. Install:

•Connecting arm •Relay arm • Rear shock absorber

When installing the rear shock absorber, lift up the swingarm.

REMOVING THE SWINGARM

Before removing the drive chain and the sprockets, measure the drive chain slack and a ten link section of the drive chain.

1. Check

•Swingarm free play

Checking steps:

• Check the tightening torque of the pivot shaft nut.

Pivot shaft nut:

• Check the swingarm side play 0 by moving it from side to side.

If side play is noticeable, check the collar, spacers, bearings, bushings and frame pivot.

• Check the swingarm vertical movement [b] by moving it up and down.

If vertical movement is tight or rough, or if there is binding, check the collar, spacers, bearings, bushings and frame pivot.

2. Remove:

CHECKING THE SWINGARM

1. Check: •Swingarm Bends/cracks/damage -> Replace.

Was this article helpful?

0 0

Post a comment