Checking Of Bulbs

ELEC

\jS)

d)

-(2J

2. Check the bulb terminals for continuity.

Checking steps:

• Set the pocket tester selector to the "fl x 1".

• Connect the tester leads to the respective bulb terminals. Take for example a 3-terminal bulb as shown left. First check the continuity between the © and (2) terminals by connecting the tester (+) lead to the © terminal and the tester (-) lead to the (2) terminal. Then check the continuity between the © and (§) terminals by connecting the tester (+) lead still to the © terminal and the tester (-) lead to the (3) terminal. If the tester shows "oo" in either case, replace the bulb.

3. Check the bulb socket by installing a proven bulb to it. As in the checking of bulbs, connect the pocket tester leads to the respective leads of the socket and check for continuity in the same manner as mentioned above.

ELECTRIC STARTING SYSTEM

CIRCUIT DIAGRAM

CDI unit

Battery

Fuse

Starter relay Starter motor

Starting circuit cut-off relay Neutral relay

"NEUTRAL" indicator light Main switch "START" switch "ENGINE STOP" switch Clutch switch Neutral switch Lever switch

COLOR CODE

B

.Black

Br

Brown

G

Green

Gy

Gray

L

Blue

0

Orange

R

Red

Sb

Skyblue

W

White

Y

Yellow

B/W

Black/White

B/Y

Black/Yellow

G/L

Green/Blue

G/Y

Green/Yellow

L/W

Blue/White

R/W

Red/White

W/B

White/Black

Y/B

Yellow/Black

STARTING CIRCUIT OPERATION

The starting circuit on this model consist of the starter motor, starter relay, neutral switch, starting circuit cut-off relay, clutch switch, neutral relay and lever switch. If the main switch is on and the "ENGINE STOP" switch is RUN, the starter motor can be operated only if:

•The transmission is in neutral (the neutral switch is on) and the select lever is in forward (the lever switch is closed).

•Pull in the clutch lever (the clutch switch is closed).

The starter motor can be operated irrespective of the engine stop switch ("OFF" or "RUN"); however, the engine can be started if the engine stop switch is at "RUN".

The starting circuit cut-off relay prevents the starter from operating when the transmission is in gear or select lever is in reverse, and clutch is engaged. In this instance, the starting circuit cut-off relay is off so that current cannot reach the starter motor.

© Fuse © Battery © Starter relay © Starter motor © Starting circuit cut-off relay © "START" switch © CDI unit

© "ENGINE STOP" switch © Clutch switch © Lever switch (Q) Neutral switch © Neutral relay © "NEUTRAL" indicator light ® TO MAIN SWITCH U FROM MAIN SWITCH

Was this article helpful?

0 0

Post a comment