Elec

4. Ignition coil resistance

•Disconnect the ignition coil lead (Orange) from the wireharness. •Connect the Pocket Tester to the ignition coil.

Primary Coil: (0x1) Tester (+) Lead->Orange ® Terminal Tester (-) Lead->Ignition Coil Base Secondary Coil: (Ox Ik) Tester ( + ) Lead -> Spark Plug lead (2) Tester (-) LeadIgnition Coil Base

•Measure the primary and secondary coil resistances.

Primary Coil Resistance [A]: 0.36 - 0.480 at 20°C (68°F) Secondary Coil Resistance [B 5.44~7.36k0 at 20°C (68°F)

MEETS BOTH SPECIFICATIONS

OUT OF SPECIFICATION

OUT OF SPECIFICATION

5. Main switch

»Disconnect the main switch coupler 0 from the wireharness.

•Check the switch component for the continuity between "Black/White (2) and Black (3)". Refer to the "CHECKING OF SWITCHES" section.

CORRECT

6. "ENGINE STOP" switch

•Disconnect the "ENGINE STOP" switch coupler 0 from the wireharness.

•Check the switch component for the continuity between "Black/White (2) and Black (3)". Refer to the "CHECKING OF SWITCHES" section.

INCORRECT

Replace handlebar switch.

INCORRECT

INCORRECT

INCORRECT

Replace handlebar switch.

Was this article helpful?

0 0

Post a comment