Elec

9. Starting circuit cut-off relay

•Disconnect the starting circuit cut-off relay © coupler (Red/White, Red/White, Blue/ White and Yellow/Black) from the wire-harness.

•Connect the starting circuit cut-off relay coupler (Yellow/Black (§), Red/White (4), Red/ White (D and Blue/White (§)) to the Pocket Tester (Qx1) and battery (12V) (2).

Tester ( + ) LeadRed/White (5) Lead Tester (-) Lead->Blue/White (§) Lead Battery ( + ) Lead-» Yellow/Black © Lead

Battery (-) LeadRed/White (4) Lead

L/W

y/b|

R/W

R/wj

•Check the starting circuit cut-off relay for continuity.

Battery Connected

Battery Disconnected

Good Condition

Bad Condition

O: Continuity x : Discontinuity

•Connect the starting circuit cut-off relay coupler.

CORRECT

INCORRECT

INCORRECT

Replace starting circuit cut-off relay.

Was this article helpful?

0 0

Post a comment