Eng

RIGHT CRANKCASE COVER

1. Install:

•Short push rod © •Push lever axle (2) •Pinion gear (3) •Washer (4) •Circlip (5)

Align the punch mark © on the push lever with the center of ribs (2), (3) on the crankcase.

3. Install:

•Right crankcase cover

Right crankcase cover screw: 10 Nm (1.0 m.kg, 7.2 ft-lb)

NEUTRAL SWITCH AND OIL FILTER

1. Install: •Neutral switch © •Neutral switch lead (2)

2. Install: •Oil filter (3) •O-ring (2) •Oil filter cover

Oil filter cover hexagon bolt: 10 Nm (1.0 m«kg, 7.2 ft-lb)

STARTER MOTOR AND CAM CHAIN

Starter motor bolt:

2. Install:

•Intake side chain guide (2)

Intake side chain guide bolt: 10 Nm (1.0 m-kg, 7.2 ft-lb)

CDI MAGNETO AND LEFT CRANKCASE

1. Install:

•Idler gear © •Shaft (2) •Collar (3) •Washer (4) •Bearing (5) •Gear (§) •Key © •CDI rotor (8)

2. Install:

Was this article helpful?

0 0

Post a comment