Inspection And Repair

Refer to front brake inspection and repair except for following items.

1. Inspect:

• Caliper piston 0

Damage/Scratches-»Replace as a set.

2. Inspect: •Brake pad Over wear limit (J) -> Replace as a set.

Brake pad wear limit: 1.0 mm (0.0394 in)

Brake pad wear limit: 1.0 mm (0.0394 in)

) Wear indicator

3. Inspect:

• Brake disc (D Wear/Deflection Out of specification -»Replace.

Maximum deflection:

0.15 mm (0.006 in) Minimum disc thickness: 3.5 mm (0.13 in)

(T) Dial gauge ASSEMBLY

Refer to front brake assembly except for following items.

Caliper

1. Tighten:

2. Mesh the bearing race tab 0 with parking brake case slit.

3. Apply wheel bearing grease to the bearing ball (2) and races (3).

4. Tighten

•Parking brake case 0

Parking brake case bolt: 28 Nm (2.8 m>kg, 20 ft»lb) Apply LOCTITE

5. Align the adjuster nut mark 0 with the parking brake lever mark

6. Tighten:

V

Pad retaining bolt:

18 Nm (1.8 m«kg, 13 ft«lb)

Brake caliper bolt:

23 Nm (2.3 nvkg, 17 ft-Ib)

Brake union bolt:

27 Nm (2.7 nvkg, 19 ft-Ib)

Was this article helpful?

0 0

Post a comment