J

MEETS

SPECIFICATION

9. Wiring connection

• Check the entire ignition system for connections.

•Refer to the "WIRING DIAGRAM" section.

CORRECT

OUT OF SPECIFICATION

OUT OF SPECIFICATION

MEETS

SPECIFICATION

CDI unit is faulty. Replace it.

CDI Magneto Rectifier/Regulator Battery Fuse

Headlight (Left) Headlight (Right) Taillight Main switch

"LIGHTS" (Dimmer) switch

COLOR CODE

B

____Black

Br

Brown

G

Green

L

____Blue

0

... .Orange

R. .

Red

Sb

... .Skyblue

W

... .White

Y

Yellow

B/W

Black/White

B/Y

____Black/Yellow

G/L

... .Green/Blue

G/W

Green/White

L/W

... .Blue/White

R/W

... .Red/White

W/B

... .White/Black

W/G

... .White/Green

Y/B

... .Yellow/Black

LIGHTING SYSTEM

CIRCUIT DIAGRAM

TROUBLESHOOTING

HEADLIGHT TAIL LIGHT DO NOT COME ON

Procedure

Check;

1. Bulb and bulb socket

2. Battery

3. Fuse

4. "LIGHTS" (Dimmer) switch

5. Main switch

6. Wiring connection (Lighting system)

•Remove the following parts before troubleshooting. 1) Front panel 2) Seat

•Use the following special tool in this troubleshooting.

Pocket Tester: YU-03112

1. Bulb and bulb socket

•Remove the bulb. Refer to "CHAPTER 3. HEADLIGHT BULB

NOCONTINUITY

KbPLALEIVIEIM F . •Check the bulb and bulb socket for continuity. Refer to the "CHECKING OF BULBS" section.

i

Replace bulb.

^CONTINUITY

2. Battery

•Check the battery condition. •Check the battery fluid level, battery terminals and specific gravity. Refer to the "BATTERY INSPECTION" section in the CHAPTER 3.

INCORRECT

•Refill battery fluid. •Clean battery terminals. •Recharge or replace battery.

Specific Gravity: 1.280 at 20°C (68°F)

CORRECT

3. Fuse

•Connect the Pocket Tester "fixl" to the fuse.

•Check the fuse for continuity.

NOCONTINUITY

CONTINUITY

4. "LIGHTS" (Dimmer) switch

•Check the switch component for the continuity between "Brown (T) and Blue (2)", "Brown (T) and Green (§)" and "Brown (T) and Yellow (4)".

Refer to the "CHECKING OF SWITCHES" section.

[A] Headlight ŒD Taillight

INCORRECT

Was this article helpful?

0 0

Post a comment