Removal

1. Place the machine on a level place.

2. Loosen:

•Nuts (rear wheel) Apply the parking brake.

3. Elevate the rear wheels by placing the suitable stand under the rear of frame.

4. Remove:

5. Remove: •Cotter pin © •Axle nut (f) • Plain washer ( •Wheel hub (4)

Rear axle nut wrench: YM-37132

Rear axle nut wrench: YM-37132

7. Remove:

Do not depress the parking brake lever and brake pedal when the brake caliper is off the disc otherwise the brake pads will be forced shut.

Was this article helpful?

0 0

Post a comment