Warning

After bleeding the hydraulic brake system, check the brake operation.

eas00136

ADJUSTING THE SHIFT PEDAL

• shift pedal position

The end © of the shift pedal is above the shift rod. (The angle © should be approximately 90o.)

Incorrect ^ Adjust.

2. Adjust:

• shift pedal position a. Loosen both locknuts ©.

b. Turn the shift rod © in direction @ or © to obtain the correct shift pedal position.

Direction©

Shift pedal is raised.

Direction©

Shift pedal is lowered.

• Tighten both locknuts.

eas00140

ADJUSTING THE DRIVE CHAIN SLACK NOTE:-

The drive chain slack must be checked at the tightest point on the chain.

• Tighten both locknuts.

eas00140

ADJUSTING THE DRIVE CHAIN SLACK NOTE:-

The drive chain slack must be checked at the tightest point on the chain.

Was this article helpful?

0 0

Post a comment