Warning

Make sure that the brake hose is routed properly.

eas00549

ADJUSTING THE FRONT WHEEL STATIC BALANCE

CAfter replacing the tire, wheel or both, the front wheel static balance should be adjusted. CAdjust the front wheel static balance with the brake discs installed.

1. Remove: Cbalancing weight(-s)

NOTE:

Place the front wheel on a suitable balancing stand.

2. Find: Oront wheel's heavy spot a. Spin the front wheel.

b. When the front wheel stops, put an "X1" mark at the bottom of the wheel.

c. Turn the front wheel 90 so that the "X1" mark is positioned as shown.

d. Release the front wheel.

e. When the wheel stops, put an "X2" mark at the bottom of the wheel.

f. Repeat steps (b) through (d) several times until all the marks come to rest at the same spot.

g. The spot where all the marks come to rest is the front wheel's heavy spot "X".

3. Adjust: Cfront wheel static balance a. Install a balancing weight © onto the rim exactly opposite the heavy spot "X".

Was this article helpful?

0 0

Post a comment