Replacing The Rear Brake Pads Note

When replacing the brake pads, it is not necessary to disconnect the brake hose or disassemble the brake caliper.

1. Remove: Cbrake caliper ©

2. Remove:

Cbrake pad cover © Cbrake pad clips © Cbrake pad pins © Cbrake pad spring ©

(along with the brake pad shims)

4. Measure: Cbrake pad wear limit © Out of specification ^ Replace the brake pads as a set.

Brake pad wear limit 0.5 mm

Brake pad wear limit 0.5 mm eas00583

5. Install: Cbrake pad shims (onto the brake pads) Cbrake pads Cbrake pad spring

Was this article helpful?

0 0

Post a comment