Cable Routing

Main switch lead Front brake switch lead Handlebar switch lead (right) Throttle cable Band

Handlebar switch lead (left) Clutch switch lead Clutch cable Guide

© Headlight lead

(fj) Front flasher light lead (left)

Speedometer cable (¡3' Brake hose

Front flasher light lead (right) © Flasher relay

[A] Clamp the headlight lead and the front flasher light leads. LB J To the auxiliary light.

[0 After clamping the front flasher light leads, pass them into the hole of the front flasher stay.

[D] Pass the speedometer cable through the guide.

[E] To the flasher relay.

Flasher Relay Virago Diagrama Air Filter Yamaha Dragstar

(T) Handlebar switch lead (left)

(5) Clutch switch lead (3) Starter cable

Clip

SFuel hose

Starting circuit cut-off relay lead (1) Neutral switch lead ® A.C. magneto lead (fj) Battery negative lead

Battery positive lead

Starter relay lead

Wireharness

Rear flasher light lead

Rear carrier

Air ventilation hose

Regulator plate

Rectifier/regulator

Coolant reservoir tank hose

Starting circuit cut-off relay

Sidestand switch

Breather hose Vacuum hose

© Spark plug lead

QJ) Brake hose

© Speedometer cable

Thermo unit lead ® Headlight lead (5J) Auxiliary light © Meter light lead

[A] Pass the wireharness through the guide.

[B] Clamp the air ventilation hoses.

To oil tank.

Clamp the starting motor lead, the neutral switch lead and A.C. magneto lead. Connect the neutral switch lead to the wireharness. Connect the A.C. magneto lead to the wireharness. Connect the wireharness to the starter relay.

[0] Pass the wireharness in front of the regulator plate.

[Q Pa3s the rear flasher light lead, start on the inside of the hole of the license bracket and pass on its outside, and connect it to the wireharness.

Neutral Switch Cable For Softail

[J] Pass the wireharness and the rear flasher light [Q] leads (left and right) outside of the license _

¡0 Pass the air ventilation hose inside of the _

regulator plate and clamp it by band. [Q]

tO Pass the coolant reservoir tank hose through IS

the hole of the battery box. El Do not pinch the sidestand switch lead with the rear footrest. [N] Clamp the sidestand switch lead.

Pass the breather hoses between the left side of the relay arm and in front of the swingarm. Pass the breather hose through the hole of the bracket (left side).

Pass the fuel hose through the clamp. Pass the spark plug lead over the regulator hose. Be sure both spark plug leads do not contact the cooling fan.

Star 1100 Spark Plug Change

lSJ Pass the coolant reservoir hose over the side cowling bracket.

ED Pass the thermo unit leads outside of the regulator hose and then connect to the thermo unit.

£2 Connect the headlight lead and the thermo unit lead outside of the regulator hose.

[V] Pass the meter light lead outside of the meter.

Yamaha Xtz750 Regulator Connecting

o oo

® ©

Fan motor lead

©

Rear carrier

Cooling fan

©

Rear flasher light lead (left)

<D

Band

<B>

Wireharness

Coolant reservoir tank hose

©

Battery box

©

Starter cable

©

Starting motor lead

©

Clutch cable

©

Air ventilation hose

Clamp

©

Neutral switch lead

<D

Air ventilation hose

©

A.C. magneto lead

Oil tank

®

Spark plug lead

©

Rear flasher light lead (right)

©

Fuel hose (from carburetor)

<0>

Tail/brake light lead

©

Clip

© Fuel pump assembly @ Fuel hose (from fuel tank) Spring

Vacuum hose (from carburetor joint)

© Fuel pump assembly @ Fuel hose (from fuel tank) Spring

Vacuum hose (from carburetor joint)

Carburetor Assy 1100

Clamp the starter cable and reservoir tank hose in front of the cross pipe.

Pass the coolant reservoir tank'hose and starter cable through the guide.

Pass the clutch cable through the guide.

Clamp the fan motor leads over the frame.

Pass the air ventilation hose through the hole of the bracket.

03 Clamp the wireharness, air ventilation hose, coolant reservoir tank hose and starter motor lead with the former two on the upper side and the latter two on the lower side.

El Connect the rear flasher light lead (right) to the wireharness.

ED Connect the tail/brake light lead to the wireharness.

CD Connect the rear flasher light lead (left) to the wireharness.

[j] Pass the coolant reservoir tank hose right side of the starter relay.

IE] Clamp the wireharness and the air ventilation hose.

[Q Pass the leads under the frame.

jVl] Clamp the coolant reservoir tank hose (outside) and the spark plug lead (inside).

|N1 Pass the fuel hose over the vacuum hose.

[Q] Pass the vacuum hose under the fuel hose.

1996 Daytona Triumph Fuel Line Routing

(1) Ignitor unit

03)

Master cylinder reservoir tank

@ Holder

©

Oil tank breather hose

(3) Horn

©

Wireharness

(3) Fan motor lead

© ©

Ignition coil

(5) Spark plug lead

Band

(§) Spark plug cap

(if

Clutch cable

(7) Rear brake switch

dg>

Brake hose

® Clamp

©

Throttle cable

(9) Rear brake switch lead

Front brake switch lead

© Master cylinder (rear brake)

(2>

Handlebar switch lead (right)

© Rear brake hose

©

Main switch lead

© Master cylinder reservoir hose.

Yamaha Dragstar 650 Fuse Box

9-37

E ED

Connect the wireharness to ignitor unit.

Clamp the rear brake switch lead.

Pass the rear brake hose through the guide.

Clamp the master cylinder reservoir hose.

Connect the rear brake switch leads to the wireharness under the clamp.

Pass the oil tank breather hose on the inside of the down tube.

Pass the clutch cable through the guide. Pass the brake hose through the guide.

Yamaha 750 Frame

spec

insp

adj

CHAPTER 3. PERIODIC INSPECTION AND ADJUSTMENT

INTRODUCTION 3 1

PERIODIC MAINTENANCE/LUBRICATION 3-1

SEAT, FUEL TANK AND COVER 3-3

REMOVAL 3-3

INSTALLATION 3-4

ENGINE 3-5

VALVE CLEARANCE ADJUSTMENT 3-5

CARBURETOR SYNCHRONIZATION 3-13

TIMING CHAIN ADJUSTMENT 3-15

IDLE SPEED ADJUSTMENT 3-15

THROTTLE CABLE FREE PLAY ADJUSTMENT 3-16

SPARK PLUG INSPECTION 3-18

IGNITION TIMING CHECK 3-19

COMPRESSION PRESSURE MEASUREMENT 3-20

ENGINE OIL LEVEL INSPECTION 3-22

ENGINE OIL REPLACEMENT 3-23

CLUTCH ADJUSTMENT 3-25

AIR FILTER CLEANING 3-26

CARBURETOR JOINT INSPECTION 3-27

FUEL LINE INSPECTION 3-28

EXHAUST SYSTEM INSPECTION 3-28

COOLANT LEVEL INSPECTION 3-29

COOLANT REPLACEMENT 3-30

COOLING SYSTEM INSPECTION 3-33

CHASSIS 3-34

FRONT BRAKE ADJUSTMENT 3-34

REAR BRAKE ADJUSTMENT 3-35

BRAKE FLUID LEVEL INSPECTION 3-36

BRAKE PAD INSPECTION 3-37

BRAKE LIGHT SWITCH ADJUSTMENT 3-37

AIR BLEEDING (HYDRAULIC BRAKE SYSTEM) 3-38

CHANGE PEDAL ADJUSTMENT 3-39

DRIVE CHAIN SLACK ADJUSTMENT 3-39

DRIVE CHAIN LUBRICATION 3-41

STEERING HEAD ADJUSTMENT 3-41

FRONT FORK INSPECTION 3-43

REAR SHOCK ABSORBER ADJUSTMENT 3-44

TIRE INSPECTION 3-45

WHEEL INSPECTION 3-47

SPOKES INSPECTION AND TIGHTENING 3-48

CABLE INSPECTION AND LUBRICATION 3-48

LEVER AND PEDAL LUBRICATION 3-48

SIDESTAND LUBRICATION 3-49

REAR SUSPENSION LUBRICATION 3-49

insp

adj

BATTERY INSPECTION 3-50

FUSE INSPECTION 3-53

HEADLIGHT BEAM ADJUSTMENT 3-54

HEADLIGHT BULB REPLACEMENT 3-55

Was this article helpful?

0 0

Responses

  • Negisti
    How to instal breather hose on xtz750?
    8 years ago
  • Michelle Hahn
    Where is the oil filter on a yamaha virago 1100 1996?
    8 years ago
  • Adele
    How do you properly connect vacuum and fuel lines under the gas tank of a 1997 cbr 1100xx?
    8 years ago
  • andrew
    How to change hoses on yamaha road star carburetor?
    7 years ago
  • hilda tunnelly
    How to change fuses yamaha virago 1100?
    7 years ago
  • Winta Girmay
    Where are the fuses on a yamaha dragstar?
    7 years ago
  • jessica
    How throttle cables are connected to carburetor of yamaha xtz 750 images?
    3 years ago

Post a comment