Engine Oil Replacement

insp

adj

eh

•Drain bolt (2) (oil strainer case) •Drain plug (3) (oil pan)

Drain the crankcase and oil tank of their oil.

5. If the oil filter is replaced with oil change, perform the following. Oil filter replacement steps: •Remove the oil filter cover (Î) and oil filter element (2). •Check the O-ring, if cracked or damaged, replace them with a new one. •Install the oil filter element and oil filter cover.

6. Install:

•Drain bolt (oil strainer case) •Drain plug (oil pan)

Drain bolt (oil strainer case): 30 Nm (3.0 m-kg, 22 ft-lb) Drain plug (oil pan):

Check the gasket (drain bolt and plug). If damaged, replace them with a new one.

Oil quantity:

Without oil filter change

4.0 L (3.5 Imp qt. 4.2 US qt) With oil filter change •4.1 L (3.6 Imp qt, 4.3 US qt)

Refer to the "ENGINE OIL LEVEL INSPECTION"

section.

Oil gallery bolt:

Checking steps:

•Slightly loosen the oil gallery bolt (T).

•Start the engine and keep it idling until oil begins to seep from the oil gallery bolt. If no oil comes out after one minute, turn the engine off so it will not seize.

•Restart the engine after solving the pro-blem(s), and recheck the oil pressure.

•After chocking, tighten the oil gallery bolt to specification.

Oil gallery bolt:

+1 0

Responses

  • ivo nucci
    Which engine oil yamaha xtz 750 oil filter?
    6 years ago
  • Lily Lothran
    How to change oil fiter on yamaha xtz 750?
    6 years ago
  • THOMAS FASSBINDER
    How to drain oil on a yamaha xtz 750?
    6 years ago

Post a comment