Yamaha Motor Corporation Usa Street And Enduro Motorcycle Limited Warranty

Yamaha Motor Corporation, U.S.A. hereby warrants each new model Yamaha motorcycle will be free from defects in material and workmanship for the period of time stated herein, subject to certain stated limitations. THE PERIOD OF WARRANTY for Yamaha motorcycles originally equipped with headlight, stoplight, and turn signals shall be one (1) year from the date of purchase, with no mileage limitation. MODELS EXCLUDED FROM WARRANTY include those used for non-Yamaha-authorized renting, leasing, or...

Checking the front brake pads and rear brake shoes

The front brake pads and the rear brake shoes must be checked for wear at the intervals specified in the periodic maintenance and lubrication chart. indicator grooves have almost disappeared, have a Yamaha dealer replace the brake pads as a set. indicator grooves have almost disappeared, have a Yamaha dealer replace the brake pads as a set. Each front brake pad is provided with wear indicator grooves, which allow you to check the brake pad wear without having to disassemble the brake. To check...

Storage compartment

Xvs 650 Storage Compartment

The storage compartment is located on the left side of the vehicle. 1. Slide the lock cover open, insert the key into the lock, and then turn it clockwise. To open the helmet holder, insert the key into the lock, and then turn the key as shown. To lock the helmet holder, place it in the original position, and then remove the key. . Storage compartment cover . Storage compartment lock cover . Storage compartment lock Never ride with a helmet attached to the helmet holder, since the helmet may...

Handlebar switches Left

Yamaha Xvs 650 Left Hand Switch

Turn signal switch lt cj gt 1. Dimmer switch 0IfD 2. Turn signal switch lt cj gt 1. Engine stop switch Q 1. Engine stop switch Q Set this switch to io for the high beam and to go for the low beam. Turn signal switch lt To signal a right-hand turn, push this switch to c gt . To signal a left-hand turn, push this switch to lt . When released, the switch returns to the center position. Since this model is equipped with a self-canceling system, the turn signal lights will...

Adjusting the shock absorber assembly

Spring preload adjusting ring This shock absorber assembly is equipped with a spring preload adjusting ring. Never attempt to turn an adjusting mechanism beyond the maximum or minimum settings. Adjust the spring preload as follows. 1. Remove the passenger and rider seats. See page 3-9. 2. To increase the spring preload and thereby harden the suspension, turn the adjusting ring in direction a . To decrease the spring preload and thereby soften the suspension,...